Reprogram BMW after doing Automatic to Manual Conversion Based on my E36 328is experience, written in 2010. Assumptions This guide assumes the following: You have programmed a BMW ECU/DME before using DIS or similar. You are taking all the necessary safety precautions. (Fully charged battery etc…) You have DIS working (We used EasyDIS 1.0, Base 44) You have Ediabas (INPA, NCS Expert, IFH Serve) installed and working. You’re able to read between the lines of our crappy document, some steps may differ slightly and our wording may be somewhat imprecise. Data Gathering Make notes of the following: ...